All Trenton primers meet AWWA C217 2016 standards.

  • Description: Temcoat™ 3000 is a high-temperature
    microcrystalline wax-based coating compound
    that will not melt and can be applied at ambient
    temperatures from 0° to 230°F. It does not
    require a primer or curing time and is easily
    applied by hand.

  • End Use: Temcoat 3000 is used as an anticorrosion
    compound for aboveground, underground and
    underwater metal surfaces. It is used as a coating
    with a wrapper or as a priming paste with Wax-
    Tape® systems. Because of its paste consistency
    over a wide temperature range, it is an excellent
    material for filling voids in both systems. It can be
    used for straight pipe, irregular fittings and flat

  • Packaging: 3-gallon pails (approx. 24 lbs/pail)
    1-gallon cans (4 gallons/case) 32 lbs/case


  • Withstands high ambient temperatures
  • Goes on easily by hand
  • No primer required
  • No waiting for drying or curing
  • Nonhazardous, no VOCs
  • Minimal surface preparation
  • Can be applied to wet pipe
  • Supports cathodic protection
Safety Data Sheet Product Data Sheet

Color Brown
Pour Point Non-melting
Flash Point 350° F (minimum)
Dielectric strength 100 volts per mil
Application Temperature 0 - 230° F

Northtown Company - 5202 Argosy Ave., Huntington Beach, CA 92649 - Phone: 714-897-0700 - Fax: 714-897-0600